Amateur radio

20-Pack RG11 F-Type Compression Coax Connectors with Weather Seal

4.0 2 reviews 2 min read

Reviews

4.0/ 5

Average of 2 reviews

Brand Zkarabc

  • 5 stars 0
  • 4 stars 2
  • 3 stars 0
  • 2 stars 0
  • 1 star 0
20-Pack RG11 F-Type Compression Coax Connectors with Weather Seal

Product description

This kit supplies twenty F-type compression fittings made to fit standard RG11 coaxial cable.

Each connector uses a nickel-plated copper outer shell for strength and corrosion resistance. The conduction element is a copper core with silver plating to improve conductivity and reduce signal loss, and a Teflon (PTFE) insulator surrounds the center pin to maintain dielectric stability. Two weather-sealing O-rings — one internal and one at the rear — create a moisture barrier to protect the cable end from water ingress and corrosion, making these suitable for outdoor antennas, satellite dishes and other exposed installs.

Interface and compatibility are standard F-type, sized for RG11 cable which has a larger outer diameter than RG6. The connectors are longer than common RG6 fittings to accommodate the thicker RG11 conductor and insulation. Because of their length and compression design, a compatible RG11 compression tool (and in some setups a longer jaw) is required for proper termination.

Typical applications include cable modems, CATV, satellite receivers, DVRs, CCTV security cameras, off-air antennas and MoCA networks. The set contains 20 RG11 F-type compression connectors with weatherproof seals, intended for professional-style terminations where low attenuation and rugged, long-lasting connections are needed.

Pros

  • Low-loss silver-plated center pin and PTFE insulator
  • Dual O-ring weather seals for outdoor protection
  • Durable nickel-plated copper shell resists corrosion

Cons

  • Requires an RG11-compatible compression tool
  • Longer connector body may need extended tool clearance
  • No printed installation instructions included

VerdictThese heavy-duty RG11 F-type compression connectors deliver durable, weather-resistant terminations and low signal attenuation thanks to silver-plated pins and a Teflon insulator. The robust nickel-plated copper shell and dual O-ring sealing make them well suited for outdoor antennas and long cable runs. Installation requires a proper RG11 compression tool and you may need a longer tool due to the

Reviews

  1. Boomer 4/5

    Solid Construction, Mind Your Tool Length

    Well-made connectors sized for RG11’s thicker jacket. There are no printed instructions, so you need to seat the center pin on the conductor and push it into the body before compression. Their extended length means you should confirm your crimp tool can handle them.

  2. Eddie 4/5

    Handy for Bulk Rewiring

    I replaced most of the coax in the house and used these after trimming cables to length. They compressed cleanly and the modem and TV show steady signal levels. The 20-pack is convenient and leaves a few spares.

Comments

No comments yet.

Sign in or sign up to comment.

Amateur radio

Big Horn Dust Collection Grounding Kit — 50 ft Copper Wire

4.4 5 reviews

A grounding kit designed to dissipate static in dust collection systems during use. Supplies 50 feet of bare copper wire plus mounting bolts, connectors and wire nuts for typical shop ducting layouts. Compatible as a replacement for OEM# JW1053.

Amateur radio

2-Pack Coaxial Surge Protectors for TV and Satellite Antennas

4.9 8 reviews

Two inline F-type coaxial surge protectors designed for TV, cable and satellite lines. 75Ω, F-female to F-male, 1A max, with a fast 100 ns response and 100A discharge handling. Automatically isolates during a strike and reconnects after ~10 seconds. Fits CATV/MATV/SATV systems, installs inline at th

Amateur radio

2-Pin T-Style Dipole FM Wire Antenna for Sony Boomboxes

4.0 2 reviews

Replacement 2‑pin T-shaped FM dipole wire antenna designed for many Sony boombox models. Improves FM reception, uses durable copper conductors and anti-oxidation plugs, and installs by plugging into the reserved antenna port for simple repair or upgrade.

Amateur radio

Master Appliance EC-MINI Compact Heat Gun — Mini Heat Tool

4.9 7 reviews

A compact, high-flow mini heat gun built for detail work and wiring. Delivers 9.9 CFM at 350 W, climbs to about 640°F fast, and includes a heat-shrink reflector plus a built-in wire stand for hands-free cooling. Suited for crafts, resin, embossing and heat-shrink tasks.

Amateur radio

Iambic Double-Paddle CW Key — Black & Red

4.4 8 reviews

A high-speed iambic double-paddle Morse key engineered for responsive CW operation. Features solid brass contact points, stainless fasteners, a nickel-plated steel spring and soldered braided copper leads. Four sealed precision ball bearings ensure a silky feel. Compact, mountable, and suitable for

Amateur radio

38" J-Pipe Antenna Mast — One-Piece Tilt Mount Pole

4.9 8 reviews

A single-piece, powder-coated J-pipe mast designed to raise rooftop or side-mounted antennas and devices. Built from durable metal with a rust-resistant finish, it accepts a mounting foot on either end and includes the bracket hardware needed for installation. Measures 38 inches long with a 1.66-inc

Outdoor

Insulated Backpack Cooler Bag — 33/45 Can Soft Cooler

4.8 8 reviews

A versatile insulated backpack cooler sized for 33 or 45 cans that folds flat for storage. Features a leak-resistant PEVA interior, external mesh side pockets, a front stash pocket, padded straps and sturdy stitching for outdoor use.